Aluminium dan logam nonfero
93 Produk eksporBandingkan aluminium dan logam nonfero lainnya berdasarkan paduan, temper, bentuk, dan dimensi.
Grade tersertifikasi
Bentuk
- Foil
- Pipe
- Bar
- Angle
- Beam
Standar didukung
Aplikasi
Pilihan produk aluminium
Aluminum procurement route
Choose the product form, then lock alloy and temper
Start from sheet, plate, coil, foil, extrusion, or bar. Complete the RFQ with the governing standard, alloy, temper, dimensions or profile drawing, surface, critical tolerances, mechanical requirements, inspection, quantity, and packing.
PL
Sheet & plateForming, machining and structural stock CO
CoilSlitting, forming, roofing and cladding FO
FoilConverter, insulation and industrial roll stock EX
Extrusion & barCustom profiles and machining stock | Alloy series | Temper families | Common forms | Review route |
|---|---|---|---|
| 1xxx | O, H12-H24 | Sheet, coil, foil | Formability, conductivity, gauge and surface control |
| 3xxx | O, H14-H26 | Sheet, coil, foil | Forming, corrosion exposure, coating and end-use acceptance |
| 5xxx | O, H32-H116 | Sheet, plate, coil | Welding, forming and marine or road-salt exposure review |
| 6xxx | T4, T5, T6, T651 | Extrusion, plate, sheet, bar | Profile geometry, heat treatment, joining and mechanical zones |
| 2xxx / 7xxx | T3, T4, T6, T7 families | Plate, sheet, bar, selected extrusion | Strength, toughness, corrosion protection and project qualification |
Katalog
Cari produk
Cari berdasarkan produk, grade, standar, material, atau bentuk.
Filter
99 hasil
Tidak ada produk yang cocok
Gunakan kata pencarian yang lebih umum atau atur ulang filter.
Kirim kebutuhan AndaKategori dan tabel grade di bawah mengikuti filter yang dipilih.
Minta penawaranHasil teratas
Semua filter
Membutuhkan kelompok material lain?
Lihat juga kategori baja tahan karat, baja karbon, baja berlapis, pipa, aluminium, dan produk setengah jadi di katalog utama.
aluminum.tsingshanss.com · 93 produk
Katalog aluminium
Kategori aluminium dan logam nonfero
Bandingkan kategori, grade, standar, dan persyaratan pesanan sebelum memilih produk.
Produk
Bandingkan bentuk dan paduan aluminium
Bandingkan bentuk, material, grade, dan standar sebelum mengirim spesifikasi.
Grade/standar utama adalah nilai pertama; buka halaman produk untuk rentang penuh.
Aluminum and non-ferrous procurement snapshot by alloy, temper, and form
Compare aluminum coil, plate, foil, bar, profile, pipe, and copper options by alloy series, temper, surface, tolerance, and application.
Standards
- ASTM B209
- EN 485
- EN 573
- GB/T 3880
- ASTM B221
Grades
- 1050
- 1060
- 3003
- 5052
- 5754
- 6061
- 6082
- 7075
Product forms
- Coil
- Plate / Sheet
- Foil
- Bar
- Profile
- Pipe
- Copper tube
Applications
- Lightweight structures
- Transport panels
- Roofing
- Electronics
- Packaging
- Heat exchange
What to confirm before requesting aluminum quotation
Aluminum sourcing depends on alloy, temper, thickness or diameter, surface, tolerance, packing, and application performance.
Inquiry parameters
- Confirm alloy and temper, such as 1050 O, 3003 H24, 5052 H32, 6061 T6, or 7075 T6.
- Confirm form, thickness, width, diameter, length, surface, tolerance, and processing needs.
- State the application, such as forming, structural use, roofing, packaging, heat transfer, or machining.
- Share quantity, destination port, packing preference, and required inspection documents.
Packing and documents
- Use seaworthy wooden pallets, moisture protection, paper interleaving, or coil/foil packaging based on form.
- Confirm MTC, packing list, invoice, certificate of origin, and alloy/temper marking.
- For foil and surface-sensitive products, confirm clean wrapping and edge protection.
Quality checks
- Check alloy composition, temper, mechanical properties, thickness, width, and surface condition.
- Confirm flatness, straightness, diameter tolerance, or foil pinhole requirements when relevant.
- Use sample confirmation or third-party inspection for surface-critical and precision orders.
Procurement FAQ
Common sourcing questions
What information is needed for an aluminum quotation?
Please provide alloy, temper, product form, dimensions, surface, tolerance, quantity, destination port, packing, and inspection requirements.
How should aluminum alloy and temper be selected?
Selection depends on strength, formability, corrosion resistance, weldability, machining, and final application. Share the use case so suitable alloy-temper options can be reviewed.
Can aluminum and copper products be reviewed in one inquiry?
Yes. Aluminum coil, plate, foil, bar, profile, pipe, and copper tube requirements can be reviewed together when specifications are clear.
Tsingshan Steel (Shandong)
Direkomendasikan untuk RFQ
Mulai pertanyaan Anda
Custom Processing & Seaworthy Packaging Solutions
Need custom lengths, precision slitting, beveling, or specific export packing? Speak directly with our metallurgical engineers to lock in your project specifications.
- Formulir: kirim rincian produk, persyaratan dokumen inspeksi, dan instruksi kemasan.
- WhatsApp: diskusikan grade, dimensi, jumlah, dan kebutuhan pengiriman.